Filter
Top Products
88 89Data-transfer mode
DISCONNECTING THE CAMERA FROM A COMPUTER
Windows XP, 2000 Professional, and Me
To disconnect the camera, click once on the unplug-or-eject-hardware icon located
on the task bar. A small window opens indicating the device to be stopped.
When more than one external device is connected to the
computer, repeat the procedure above except right click
on the unplug-or-eject-hardware icon to open the unplug-
or-eject-hardware window.
Click on the small window to stop the device; the safe-to-remove-hardware message appears.
Disconnect the USB cable.
Confirm that the indicator lamp is not lit and then drag the mass-
storage device icon and drop it into the trash. Turn the camera off,
and then disconnect the USB cable.
Macintosh
Confirm that the indicator lamp is not lit. Turn the camera off, and then disconnect the USB cable.
Windows 98 / 98 Second Edition
Never disconnect the camera when the indicator lamp is lit - the data or memory card may
permanently be damaged.
The hardware devices connected to the system are displayed.
Click the display-device-components check box. Highlight the
device to be stopped by clicking on it then click “Stop.”
A confirmation screen appears to indicate the devices to be
stopped. Clicking “OK” stops the device.
The safe-to-remove-hardware message appears.
Disconnect the USB cable.