Kyocera L3 Digital Camera User Manual


 
Using the Camera “s” Mode and Movie “m” Mode Functions
59
s / m
[sM]/[mM][WB PRESET] — Setting White Balance
Manually
Use this mode if there are multiple light sources or you want to set white absolutely.
Operation
Prepare an object such as a piece of white paper for setting the standard for “white”.
1 Turn on the power and set the mode select dial to “s” or “m”.
2 Press the MENU button to display the menu icons.
Since the setting for this mode is saved even if the power is turned off, it is necessary to reset
the setting depending on the scene and subject to be shot.
Set the mode respectively in Camera s and Movie m mode.
3 Press Left or Right on the directional keypad to
select [sM] or [mM], then press the e button.
4 Press Up or Down on the directional keypad to
select [WB PRESET], then press Right on the direc-
tional keypad.
5 Locate the camera above the white subject you
have prepared until the image fills the screen and
select [SET] then press the e button.
6 Press the MENU button. When the menu display is
turned off, the setting is completed
.
[ ] will appear on the LCD monitor.
SETTINGS
COLOR
STANDARD
SET
PROGRAM
COLOR MODE
CHROMA
SHARPNESS
WB PRESET
AE MODE
STANDARD
PRESET WB?
SET
CANCEL
Make sure the
subject fills the entire
screen.
White subject such
as a piece of paper
00_8CQ.book Page 59 Wednesday, May 14, 2003 8:10 PM