27 28
80mm
1:28
M
F
A
F
1
1
1
1
4
4
2
2
22
2
0
0
5
f
t
m
B
A
Setting the Film Speed
The film speed (ISO speed) is a numeric reference of the sensitivity to light, and must be
set correctly. If the set value differs from the actual value of the film in use, under- or
over-exposure may occur.
1. Press the (up) button.
Press and hold the (up) button on the film
magazine for approximately one second. The ISO
indicator will blink.
The setting is not complete while the ISO indicator is blinking.
For power-saving purposes, display on the LCD panel disappears in 5 seconds, or
when the magazine is detached from the camera body. The display resumes by press-
ing the
button.
When the battery of magazine is exhausted and it is not attached to the camera body,
no information will be displayed on the LCD panel. As it may cause malfunction,
replace the battery with a new one.
2. Set the film speed.
Select the desired film speed with the (up) and
(down) buttons. When the correct film sensi-
tivity is displayed, press the film advance button
A to set it or leave the ISO icon blinking for five
seconds.
C
D
P
A
v
T
v
M
X
C
F
S
E
T
A
Attaching a Lens and a Magazine
Attaching a Lens
Line up the lens mount alignment mark A with
mark B on the camera to fit the lens in place,
then rotate it in the direction of the arrow until it
clicks into place.
1. Fit the bracket at the bottom of the interface of
the camera body with the groove on the maga-
zine.
Attaching a Magazine
2. Press the magazine to the camera body, then
the couplers on the camera body and the maga-
zine together. You will hear the shutter and mirror
click into the shooting position.