Filter
Top Products
Exposure compensation and flash compensation can be linked.
Custom settings (C-25 on page 95)
If the flash-charge mark is not displayed, the flash compensation button
AA
AA
A can not
be used.
Keep pressing the set button to activate the flash compensation mode. You can check
the exposure compensation value.
If you turn the shutter release mode selector lever to the “L” (power OFF) position,
the compensation value will be canceled.
External LCD Panel (normal display)
Viewfinder LCD read-outs.
4. When the shutter button is half-pressed, the
“ ” display appears on the external LCD, and
“ ” appears on the LCD inside the viewfinder with
a + compensation, or “ ” appears with a – com-
pensation.
P
A
v
T
v
M
X
C
F
A
P
A
v
T
v
M
X
C
F
By combined use of a Metz flash and the SCA3952 adapter, the camera adjusts for
flash. It can be adjusted within ±3EV in increments of 1/3 steps.
1. Turn on the power
Install the SCA3952 adapter on the Metz flash,
and put it on the camera then lock the flash in
place using the locking knob on the flash shoe.
Turn the shutter release mode selector lever to
the “S” or “C” position, and turn ON the flash power
switch.
2. When the flash charge confirmation lamp lights,
press the set button A in. The “ ” display
appears on the main LCD panel.
3. Turn the front or rear dial to select the flash
compensation value.
Flash Compensation Settings
85 86