244
Technical Notes—Optional Accessories
Viewfi nder
eyepiece
accessories
♦Focusing Screens: The focusing screens available for the D2X are
listed below. Type B and E screens can also be used with the D2H.
Type V
III
The D2X comes with a type V clear-
matte III focusing screen (for use with
the D2X only) which shows the full
high-speed crop for enhanced high-
speed crop photography.
Type E
III
The type E clear-matte III focusing
screen is etched with a grid, making
it suitable for copying and architec-
tural photography. Best results are
achieved with PC-Nikkor lenses.
Type B
III
A type B BriteView III focusing screen
is supplied with the camera.
♦DG-2 Magnifi er: The DG-2 magnifi es the scene displayed in the
viewfi nder. Use for close-up photography, copying, telephoto lenses,
and other tasks that call for added precision. DK-7 eyepiece adapter
(available separately) required.
♦DK-14 and DK-17A Antifog Finder Eyepieces: These viewfi nder eye-
pieces prevent fogging in humid or cold conditions. The DK-17A is
equipped with a safety lock.
♦DK-19 Rubber Eyepiece Cup: The DK-19 makes the image in the view-
fi nder easier to see, preventing eye fatigue.
♦Diopter-Adjustment Viewfi nder Lenses: To accommodate individual
differences in vision, viewfi nder lenses are available with diopters
of –3, –2, 0, +1, and +2 m
–1
. The DK-17C is equipped with a safety
lock.
♦DR-5 Right-Angle Magnifying Viewing Attachment / DR-4 Right-Angle
Viewing Attachment: The DR-4 and DR-5 attach to the viewfi nder
eyepiece at a right angle, allowing the image in the viewfi nder to be
viewed from above when the camera is in the horizontal shooting
position. The DR-5 can also magnify the view through the viewfi nder
by 2 × for greater precision when framing (note that the edges of the
frame will not be visible when the view is magnifi ed).
♦DK-7 Eyepiece Adapter: The DK-7 is used when attaching the DG-2
Magnifi er or DR-3 Right-Angle Viewing Attachment to the D2X.