Filter
Top Products
66
Taking Photographs—White Balance
Copying White Balance from d-0 to Presets d-1 – d-4
To copy a measured value for white balance
from d-0 to any of the other presets (d-1 – d-4),
highlight the destination preset in the thumbnail
display and press the center of the multi selector
as described in steps 1–3 on page 63. The menu
shown at right will be displayed.
1
Press the multi selector up or down to high-
light Copy d-0.
Nikon Capture 4
Nikon Capture 4 version 4.2 or later (available separately) can be used to edit white
balance when RAW photographs taken with the D2X are displayed on a computer.
The edited value can be copied directly to a white balance preset while the camera is
connected to a computer, or the image can be saved to the camera memory card and
the white balance value copied using the Select image option in the preset menu.
Any comments created with Nikon Capture 4 will also be copied to the comment for
the selected preset. See the Nikon Capture 4 manual for details.
2
Press the multi selector to the right to copy
white balance from d-0 to the selected preset
and return to the thumbnail display. If com-
ment has been created for d-0, the comment
will be copied to the comment for the selected
preset.