Filter
Top Products
250
Technical Notes—Caring for the Camera
Replacing the Focusing Screen
A type V clear-matte III focusing screen, which shows the borders of the high-
speed crop, is inserted in the camera at shipment. To insert the supplied type
B BriteView III or optional type E clear-matte III focusing screen ( 244):
1
Turn the camera off and remove the lens.
4
Using the tweezers and handling the screen
by the tab, set the replacement screen in the
holder.
2
Using the tweezers supplied with the focusing
screen, pull the focusing screen latch towards
you. The screen holder will spring open.
3
Remove the existing screen, using the sup-
plied tweezers and being careful to handle the
screen by the tab to avoid scratches.
5
Push the front edge of holder upward until it
clicks into place.
Replacing Focusing Screens
Do not touch the surface of the mirror or focusing screens.
Focusing Screens
Use only screens designated for use in the D2X or D2H.
Framing Grids
The display in type V and E focusing screens may be slightly out of position depending
on how the focusing screen is placed.