Filter
Top Products
21
The Basics of Shooting and Playback
Turning the Camera On and Off
• When the camera is turned on, the power-on lamp (green) lights and then the monitor
turns on (the power-on lamp turns off when the monitor turns on).
• To turn off the camera, press the power switch. When the camera turns off, the power-on
lamp and the monitor turn off.
• Press and hold the c (shooting/playback mode) button to turn on the camera and switch
to playback mode.
C Power Saving Function (Auto Off)
• If no operations are performed for a while, the monitor turns off, the camera enters standby mode,
and the power-on lamp flashes. If no operations are performed for approx. another three minutes,
the camera turns off automatically.
While the camera is in standby mode, the monitor turns back on if you perform any of the
following operations:
➝ Press the power switch, shutter-release button, c (shooting/playback mode) button, or
b(e movie-record) button
• The camera enters standby mode within 30 minutes while playing a slide show.
• If you are using the optional AC Adapter EH-62F, the camera enters standby mode after 30
minutes (fixed).
1 5m 0s
15m 0s
7 80
780
Flashes
No operations
performed
No operations
performed
3 min
Camera enters
standby mode.
Camera turns off.