Filter
Top Products
128
Shooting Options: The Shooting Menu
Shooting, Playback and Setup Menus
Functions that Cannot Be Applied Simultaneously
Restrictions apply to the following settings in A (auto) mode.
Flash mode
Flash mode is automatically set to W (Off) and cannot be adjusted when
Continuous, BSS, or Multi-shot 16 is selected for the Continuous setting.
Selecting Single or Intvl timer shooting for Continuous restores the last flash
mode setting applied.
Self-timer
If self-timer is on, only one picture will be taken when the shutter is released,
regardless of settings selected for the Continuous setting. The last Continuous
setting applied is restored when picture is taken or self-timer is turned off.
Continuous
Image mode is automatically set to
L
Normal (2592) and cannot be adjusted
when Multi-shot 16 is selected for the Continuous setting.
The last image mode setting applied is restored when any setting other than Multi-
shot 16 is selected for the Continuous setting.
ISO sensitivity
When ISO sensitivity is set to 3200, Image mode cannot be set to
h
High
(3648P),
i
Normal (3648), or
l
16:9 (3584). At an image mode setting of
h
High (3648P) or
i
Normal (3648), selecting 3200 for ISO sensitivity
automatically switches the image mode setting to
L
Normal (2592). At an image
mode setting of
l
16:9 (3584), selecting 3200 for ISO sensitivity automatically
switches the image mode setting to
m
16:9 (1920). When any option other than
3200 is selected for ISO sensitivity, the last image mode setting applied is
restored.
At an ISO sensitivity setting of 3200, the Multi-shot 16 option of the continuous
shooting mode is not available. At a Continuous setting of Multi-shot 16,
selecting 3200 for ISO sensitivity switches the Continuous setting to Single. The
Continuous setting does not change even when ISO sensitivity is set to options
other than 3200.
Distortion control
When Distortion control is set to On, the Continuous setting is automatically set
to Single.
Even when the Distortion control option is disabled, the Continuous setting
does not change.