Filter
Top Products
155
Technical Notes
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display Problem Solution A
O (blinks) Clock not set. Set clock. 136
B
Battery running low. Prepare to charge or
change battery.
14
N
Battery exhausted.
Battery exhausted. Charge or change battery. 14
P
Battery temperature
high
Battery temperature is
high.
Turn off camera, and allow
battery to cool down
before resuming use. After
5 seconds, this message
will disappear, the monitor
will turn off, and the
power-on lamp and flash
lamp will blink rapidly. After
the lamps blink for 30
seconds, the camera will
turn off automatically, but
you can also press the
power switch to turn it off
manually.
17
Q
(● blinks red) Camera cannot focus. • Refocus.
• Use focus lock.
26, 27
125
N
Memory card is write
protected.
Write-protect switch is in
“lock” position.
Slide write-protect switch
to “write” position.
21
P
This card cannot be
used.
Error accessing memory
card.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly inserted.
150
20
20
P
This card cannot be
read.
P
Card is not formatted.
Format card?
No
Yes
Memory card has not been
formatted for use in
COOLPIX S60.
Tap Yes to format card, or
turn camera off and replace
card.
21