Filter
Top Products
154
8
Creating and sharing images using a computer
Creating and sharing images using a computer
Before using your computer
Operating procedure
You can transfer images from the picture card in the camera to your
computer by connecting the camera to the computer with the supplied
USB cable. Depending on the Operating System of your computer, you
may have to configure your computer before connecting it to the
camera. Follow the steps below.
Normal operations cannot be guaranteed on computers with the following
Operating Systems and specifications, even when equipped with a USB
connector.
Windows 95/NT 4.0
Windows 98/98SE when upgraded from Windows 95
Macintosh OS 8.6 or lower
(However, operations have been confirmed for Macintosh OS 8.6 originally
shipped with a USB connector and USB MASS Storage Support 1.3.5.)
Computer with an add-on USB connector on an expansion card, etc.
Computers without a pre-installed Operating System or a self-built computer
Identifying the Operating System
Determining how to connect the camera to a computer
Windows 98/
98SE (Second Edition)
Windows Me/2000/XP
Macintosh
OS 9.0 - 9.2/OS X - 10.3
USB driver
installation
Connect the camera to the computer
(Windows P.160 Macintosh P.170)
Confirm the computer recognizes the camera
(Windows P.161 Macintosh P.170)
Transfer camera images to the computer
(Windows P.164 Macintosh P.172)
Disconnect the camera from your computer
(Windows P.168 Macintosh P.175)
Creating and sharing images using a computer