Filter
Top Products
If a problem arises
208
9
Troubleshooting
The flash does not fire
n
The flash is set to the flash off
mode.
n
Select a flash mode other than
flash off.
P.72
o
The subject was excessively
illuminated.
o
If you want the flash to fire on a
brightly illuminated subject, set
the flash to fill-in mode.
P.72
The image cannot be played back
n
The power is off.
n
Turn the camera OFF then ON
again.
P.27
o
The camera is in the shooting
mode.
o
Turn the camera on in the
playback mode.
P.27
p
No pictures have been taken.
p
Record pictures before playing
back.
P.59
q
The image information (file
name, etc.) was changed on a
computer.
q
To avoid camera malfunction,
do not change the information
on the card with a computer.
P.166
The date recorded in the image data is wrong
n
The date/time is not set.
n
Set the date/time. The date
and time are not set at the time
of purchase.
P.31
o
The camera has been left with
the battery removed.
o
Set the date and time again. P.31
p
The camera detected a
problem in the power supply
from the battery/AC adapter
during operation.
p
The camera may stop working
if the power fails during
operation. When normal
operation is restored, all the
camera settings may be reset.
Set the date and time again.
P.31
q
A card charged with static
electricity was inserted.
q
Set the date and time again. P.31
The settings are returned to the factory default settings
when the camera is turned off
n
The camera was turned off
without saving the settings.
n
Set ALL RESET to OFF. P.33
Possible cause Corrective action
Ref.
page