Filter
Top Products
If a problem arises
210
9
Troubleshooting
The picture has obscured edge(s)
n
The lens was partly blocked by
your finger or the strap.
n
Hold the camera correctly. P.58
o
The subject was too close.
o
Check the actual picture area
by using the monitor to take the
picture.
P.59
The picture is too bright
n
The flash was set to the fill-in
flash mode.
n
Set a flash mode other than fill-
in flash.
P.72
o
The subject was excessively
illuminated.
o
Adjust the exposure
compensation toward minus
(–) or change the camera
position.
P.79
The picture is too dark
n
The flash was blocked by your
finger.
n
Hold the camera correctly. P.58
o
The subject was out of the
working range of the flash.
o
Shoot within the flash working
range.
P.73
p
The flash was set to the flash
off mode.
p
Select a flash mode other than
flash off.
P.72
q
The picture was taken against
the light.
q
Set the flash to fill-in mode, or
use the spot metering mode.
P.72,
80
r
You took a picture of a bright
subject such as a snow-
covered landscape.
r
You can take a beautiful picture
in this situation by using the
virtual mode dial to select
BEACH & SNOW.
P.79
The colors of pictures taken indoors look unnatural
n
Indoor lighting can affect the
picture’s colors.
n
Adjust the white balance to suit
the lighting.
P.77
o
There was no white in the
subject.
o
Include something white in the
picture, or shoot using the fill-in
flash mode.
P.72
p
The white balance setting is
wrong.
p
Adjust the white balance
according to the light source.
P.77
Possible cause Corrective action
Ref.
page