Filter
Top Products
26
2
Preparations
Before operating your camera
Power on/off
The camera can be turned on in “shooting mode”, “playback mode” or
“computer connection mode”.
Do not do any of the following while the camera is turned on. Such actions could
destroy all the data on the card. Once destroyed, data cannot be restored.
• Open the picture card cover or the battery compartment cover.
• Connect or disconnect the AC adapter.
When taking pictures (Shooting mode)
Turn the camera on.
Î Open the lens barrier by sliding it
in the direction of the arrow.
The lens extends and the subject is
displayed on the monitor.
If the lens does not extend, make sure
that the lens barrier is fully open.
To save battery power, the camera
automatically enters the sleep mode
and stops operation after about 3
minutes of non-operation. After another
5 minutes, the lens will automatically
retract. To activate the camera again,
press the shutter button or one of the
other camera buttons.
Turn the camera off.
Î Move the lens barrier slightly in
the direction of the arrow. The
lens will begin retracting. Once
the lens has fully retracted, close
the lens barrier.
The monitor turns off.
Lens barrier
Monitor
Lens barrier