Filter
Top Products
– 136 –
Item
GENLOCK
H PHASE
COARSE
H PHASE FINE
SC PHASE
COARSE
SC PHASE FINE
A.IRIS LEVEL
A.IRIS PEAK/
AVE
A.IRIS MODE
S.IRIS LEVEL
Variable
range
EXT
INT
0
.
.
.
7
.
.
.
15
0
.
.
.
128
.
.
.
255
0
.
.
.
3
0
.
.
.
128
.
.
.
255
0
.
.
.
50
.
.
.
100
0
.
.
.
50
.
.
.
100
NORM1
NORM2
CENTR
0
.
.
.
100
Remarks
This sets the cyclical signal of the
camera signal.
INT: Synchronization with the internal
reference signals that are not related
to the reference signals input to the
GENLOCK IN/(VIDEO IN) connector.
EXT: Synchronization with the
reference signal which is input to the
GENLOCK IN/(VIDEO IN) connector.
For the coarse adjustment of the H
phase in the genlock mode.
For the fine adjustment of the H phase
in the genlock mode.
For the coarse adjustment of the SC
phase in the genlock mode.
For the fine adjustment of the SC
phase in the genlock mode.
This sets the target value for the auto
iris. The brightness (iris) is controlled
using this value. The higher the
number selected, the greater the
brightness.
This sets the auto iris peak/average
value ratio. The closer the selected
value is to 0, the more the type of
control is exercised toward AVE
control; the closer it is to 100, the more
it is exercised toward PEAK control.
This selects the auto iris mode.
NORM1: Light metering over the
entire screen (except the edges).
NORM2: Light metering over the
entire screen (except the top).
CENTR: Light metering at the screen
center only.
This sets the target value for the super
iris.
(Backlight compensation mode)
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
MAIN Menu Screen 3 of 4 (SUB menus)
GENLOCK/IRIS screen
The GENLOCK and IRIS control settings are performed on this screen.
GENLOCK
GENLOCK
/IRIS
IRIS
{
:
:
:
:
:
:
:
:
:
INT
H PHASE
H PHASE
PHASE
COARSE
COARSE
07
FINE
FINE
128
128
SC
PHASESC
0
A.
IRISA.
IRISA.
LEVEL
IRISS . LEVEL
050
PEAK / AVE 050
MODE NORM1
100
¢
|
The underlining in the variable range column indicates the setting in the preset mode.
USER menu: The USER menu appears when the MENU switch is set to SET.
ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.