Filter
Top Products
– 158 –
Specifications
VTR Section
VTR Video System (during playback on a standard playback unit)
Bands: Y; 30 Hz to 5.75 MHz o1.0 dB/p3.0 dB
P
B/PR; 30 Hz to 2.75 MHz o1.0 dB/p3.0 dB
S/N ratio: Better than 55 dB
K factor (2T pulse): Within 2%
Y/C delay: Within 30ns
VTR Audio System (during playback on a standard playback unit)
Sampling frequency: 48 kHz (synchronized to video)
Quantization: 16 bits
Frequency response: 20 Hz to 20 kHzt1.0 dB (at reference level with OFF setting
for MIC LOWCUT on setting menu)
Dynamic range: 85 dB or more (at 1 kHz, AWTD)
Distortion: Within 0.1% (at 1 kHz, reference level)
Cross talk: Less than p70 dB (at 1 kHz, between 2 channels)
Wow & flutter: Below measurable limit
Head room: 20 dB
Emphasis: T1r50 ¯s, T2r15 ¯s (can be turned ON/OFF)
VTR Tape Travel System
Tape used: DVCPRO format 1/4-inch M cassette tape
Tape speed: 33.820 mm/sec
Recording/playback time: Approx. 66 min. (using AJ-P66MP)
FF/REW time: Approx. 3 min. (using AJ-P66MP)
Connectors
Input
AUDIO IN CH1/CH2
(XLR·2, 3 pins, female): MIC/LINE switchable, balanced, 10 kilohms
MIC; Menu setting to p60, p50, p40 dBu
Phantom o48 V, ON/OFF switchable
LINE; Menu setting to p6, 0, o4 dBu
MIC IN (XLR, 3 pins, female): Phantom o48 V, balanced, 3 kilohms, Menu setting to
p60, p50, p40 dBu
GENLOCK IN/(VIDEO IN) (BNC):
1.0 Vp-p, 75 ohms (signals can be monitored on EVF)
TIME CODE IN (BNC): 0.5 V to 8 Vp-p, high impedance
Output
CAMERA OUT (BNC): 1.0 Vp-p, 75 ohms
VIDEO OUT (BNC): 1.0 Vp-p, 75 ohms
AUDIO OUT
(XLR, 3 pins, male): o4 dBu, balanced, low impedance CH1, CH2 or MIX
selectable
TIME CODE OUT (BNC): 1.5 Vp-p, low impedance
PHONES (stereo mini jack)
Other
DC IN (XLR, 4 pins, male): DC 12 V
DC OUT (4 pins, female): DC 11 V to 17 V, maximum rated current; 0.1 A
LENS (12 pins)
ECU (6 pins)
Accessories
Shoulder strap (q1), Battery connector (including screws) for supporting Sony battery, AUDIO
LEVEL CH1 control knob (including screw) (q1), Tripod mount adaptor (q1), Microphone
(with holder) (q1)