Panasonic AJ-D610WBp Camcorder User Manual


 
–5–
General and Features
This unit combines as a single integrated unit a 3-CCD color video camera which features IT-
CCDs and a 520,000-pixel on-chip lens, and a DVCPRO format VTR which incorporates com-
pression technology.
In particular, the screen aspect ratio can be switched between 16:9 and 4:3 in a single action.
The unit in itself is compact and lightweight, its power consumption is minimal, it yields a high
picture quality, and it offers excellent sensitivity, mobility and dust-proof and damp-proof capabili-
ty. As a camera with built-in VTR, the unit’s functions and performance make it ideal for use in
ENG applications.
Both the camera unit and VTR unit feature digital signal processing to achieve much higher levels
of picture quality and stability.
Memory cards complying with global standards can be used for the camera and VTR setting data
to provide a system to manage the data.
Features of the Camera Section
The camera section of the AJ-D610WB has the following features.
ÁHigh sensitivity: 2000 lux (F13)
ÁHigh S/N ratio: 63 dB (standard)
ÁUltra-low smear
ÁUltra-low flare
Digital signal processing
Signal processing is digitized by a 18 MHz (typ.) 10-bit AD/DA converter. This improves picture
quality, stability and reliability, and allows the viewfinder screen displays as well as numerous
adjustment and setup items to be converted to menus.
Setting menu
The setting menu is displayed on the viewfinder screen, and controls the status displays, messag-
es, marker displays, etc. Whether or not to display each item, as well as the display conditions
when items are to be displayed, can be selected according to the user’s convenience. For exam-
ple, display ON/OFF for the ! lamp display which informs the user that the unit has entered irregu-
lar status can be selected for 7 different conditions.
The setting menu is also used to select various settings and functions and execute memory card
operations, etc.
Setup cards
Setting menu and subject data can be stored on SRAM memory cards with a capacity of
64 kilobytes or greater which conform to PCMCIA standard ratings as setup cards. Stored data
can be saved individually or according to the shooting conditions, allowing the same setup condi-
tions to be easily reproduced and assisting in standardizing setup conditions between individual
data.
An ATA flash memory card with a memory size of 4 MB or more is required to operate the Picture
Link (Pix Link) function sold as an optional accessory.
High-function electronic shutter
Using the built-in electronic shutter achieves steady images even of quickly moving subjects. In
addition, the following special operation modes can also be selected.
ÁSynchro scan mode: This mode is suited for shooting personal computer and workstation moni-
tor screens (60.8–250 Hz), and provides images with little horizontal stripe noise.
ÁHigh vertical resolution (Super V) mode: This mode provides images with high vertical resolution
compared to standard mode.
Wide range of video gain selections
Gain values can be selected from p3 dB to o30 dB using the setting menu and the GAIN switch.
The high S/N ratio allows images with little noise to be obtained even when the gain is increased
for shooting in dark locations. Using the SUPER GAIN switch provided specially to implement the
super gain function, the video gain can be set to 30 or 36 dB.