Filter
Top Products
–52–
SHIFT/
ITEM
PAGE
UP
DOWN
MENU
CH 1 CH 2
TCG
SET
OFF
F-RUN
SET
R-RUN
MIC
MIC
AUDIO IN
LINE
ON
OFF
FRONT
REAR
CUE
CH 1
MIX
CH 2
REAR MIC POWERREAR MIC POWER
Displaying Menus on the Viewfinder Screen
Basic Setting Menu Operations
The setting menu is operated using the MENU SET/OFF switch and the SHIFT/ITEM, UP, DOWN
and PAGE buttons.
To display a SUB menu directly (user mode)
1 Set the MENU SET/OFF switch to the SET position.
The status displays at the top and bottom of the viewfinder screen are cleared, and the page
on which the previous setting menu operation was completed now appears on the screen.
When a menu is used for the first time, the page with the lowest number among the selected
pages appears on the screen.
To display a MAIN menu directly (engineer mode)
1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP
button are held down together.
MAIN menu screen 1 of 4 now appears.
The pages can also be selected using the UP and DOWN buttons in combination with the PAGE
button as indicated below.
ÁPAGEµUP: When the UP button is pressed while the PAGE button is held down, opera-
tion advances to the next menu and the menu next to it and so on for as long
as the button is held down.
ÁPAGEµDOWN: When the DOWN button is pressed while the PAGE button is held down, oper-
ation is returned to the previous menu and the menu before it and so on for as
long as the button is held down.
SHIFT/ITEM Switch
UP Button
DOWN Button
PAGE Button
MENU SET/OFF Switch
¢
|
ROP
{
MASTER
MASTER
MASTER
PED µ000
µ00
.045
µ000
µ000
µ000
µ000
µ
:
:
:
:
:
:
:
:
000
DTL
GAMMA
RGAIN
GA I NB
R PEDESTAL
PEDESTAL
PEDESTAL
G
B
MA I N MENU1 / 4
ROP
MATR I X
LO
W
SETT ING
SETT ING
SETT ING
SETT ING
MID
HIGH
ADDITIONAL DTL
DTLSK IN TONE
KNEE / LEVEL
FLARE/GAMMA
CAMERA
EE
¢
EE EEEE