Filter
Top Products
140
Manipulating Clips with Thumbnails
: Properties
The status display enables a confirmation of the SD memory
card formatted condition, available memory capacity etc.
From the thumbnail menu, select PROPERTY DEVICES
SD CARD.
If the format is compatible with SD standards, the message
“SD STANDARD: SUPPORTED” is displayed.
If the format is not compatible with SD standards, the
message “SD STANDARD: NOT SUPPORTED” is
displayed. If this is the case, writing or reading will not be
successful. Format the card with the unit. For more
information on formatting SD memory cards, see [Formatting
SD memory cards] (page 135).
Note
The indicated remaining memory capacity on the SD
memory card (PROXY REM) can be an index of remaining
memory capacity for the Proxy but may differ from the actual
remaining capacity. For SD or SDHC cards with Class
indications, the recording time may be reduced significantly
compared with the actual capacity when images of short
recording time are recorded repeatedly. If the remaining
memory capacity exceeds 999 min, “999 min” is displayed.
The remaining capacity is displayed only when set to record
the Proxy record on the SD memory card. For the setting
method, refer to the operation manual of the video encoder
card (AJ-YAX800G, optional).
Attaching the video encoder card (AJ-YAX800G, optional),
select PROPERTY DEVICES PROXY from the
thumbnail menu.
The slot in which the video encoder card is inserted, and
version information is displayed.
SD memory card Status Display
Video Encoder Card Status Display (optional)
AJ-HPX2700G-VQT1V27_eng.book 140 ページ ２００８年９月２日 火曜日 午後５時４３分