Filter
Top Products
170
Menu: Menu Description Tables
LCD MONITOR
Items/
Data Saved
Adjustable
Range
Remarks
BRIGHTNESS –7
:
+0
:
+7
Adjust the LCD monitor brightness.
–CUF–
COLOR LEVEL –7
:
+0
:
+7
Adjust the LCD monitor chroma level.
–CUF–
CONTRAST –7
:
+0
:
+7
Adjust the LCD monitor contrast.
–CUF–
BACKLIGHT NORMAL
HIGH
Adjust the backlight.
NORMAL:
Mode normally used
HIGH: This is brighter than NORMAL.
–CUF–
SELF SHOOT NORMAL
MIRROR
Select whether or not to change the LCD
monitor to mirror image.
NORMAL:
Do not change to mirror image.
MIRROR:
Change to mirror image.
–CUF–
GENLOCK
Items/
Data Saved
Adjustable
Range
Remarks
GENLOCK INT
EXT
Switch the camera synchronizing signal.
INT: Synchronize with the internal
reference signal regardless of
the reference signal input to the
GENLOCK IN connector.
EXT: Synchronize with the reference
signal input to the GENLOCK IN
connector.
–CUFR
GL PHASE HD SDI
COMPOSIT
For selecting the output signals that lock
phases to the signals that are input in the
GENLOCK IN connector. Note, however,
that in 1080-23.98PsF mode and 1080-
24PsF mode, the phase is locked to HD
SDI even if “COMPOSIT” has been
selected.
HD SDI:
For locking the HD SDI output
signals to the GENLOCK input.
For the down converter output
signals, the start position of the
video delays by about 90 lines.
COMPOSIT:
For locking the down converter
output signals to the GENLOCK
input.
For the HD SDI output signals,
the start position of the video
gains by about 90 lines.
–CUFR
H PHASE
COARSE
–100
:
+000
:
+100
Perform coarse phase adjustment for
horizontal hold when configuring a
system.
–––––
H PHASE FINE –100
:
+000
:
+100
Perform fine phase adjustment for
horizontal hold when configuring a
system.
–––––
1394 SETTING
Items/
Data Saved
Adjustable
Range
Remarks
1394 SPEED S100
S200
S400
For setting the transfer rate of signals
output from the DVCPRO connector.
S100: 100 Mbps
S200: 200 Mbps
S400: 400 Mbps
–CUF–
1394 IN CH 0
:
63
AUTO
For setting the input channel of signals
input to the DVCPRO connector.
0 - 63: To fix to the designated value
AUTO: To follow the settings of the
externally connected devices
–CUF–
1394 OUT CH 0
:
63
AUTO
For setting the output channel of signals
output from the DVCPRO connector.
0 - 63: To fix to the designated value
AUTO: To follow the settings of the
externally connected devices
–CUF–
1394 CONTROL OFF
BOTH
For setting the control for recording start/
stop operations of external devices that
are connected to the DVCPRO
connector.
OFF: Do not control the externally
connected devices.
BOTH: To control both the unit and the
externally connected devices
–CUF–
1394 CMD SEL REC_P
STOP
For setting the control of recording stop
operations of the external devices that
are connected to the DVCPRO
connector.
REC_P
: Operation to pause recording
STOP: Stopping operation
–CUF–
Items/
Data Saved
Adjustable
Range
Remarks
AJ-HPX2700G-VQT1V27_eng.book 170 ページ ２００８年９月２日 火曜日 午後５時４３分