Filter
Top Products
99
Adjustments and Settings for Recording
: Handling data
Adjustments and Settings for Recording
1 Using the menu operations, open the <LENS FILE>
screen from the FILE page.
2 Turn the jog dial button to move the arrow (cursor) to the
FILE SELECT item.
3 Press the jog dial button and the file number will flash.
Turn the jog dial button to select the file (1 to 64) to be
recorded.
4 Press the jog dial button to enter the file number.
5 Turn the jog dial button to move the arrow (cursor) to the
TITLE item.
6 When the jog dial button is pressed, the arrow (cursor)
moves to the title input area, and the input mode is
established.
7 Press the jog dial button again and turn it until the
character to be set is displayed.
When the button is turned, the character displayed is
switched in the following sequence:
8 Press the jog dial button to enter the character.
9 Turn the jog dial button to move the arrow (cursor) to the
next position (right), and repeat steps 7 and 8 to set the
characters (maximum of 12).
10
When the title has been input, turn the jog dial button to
move the arrow (cursor) to the : position.
11
When the jog dial button is pressed, the arrow (cursor)
returns to the TITLE item.
12
Turn the jog dial button to move the arrow (cursor) to the
WRITE position.
To save the lens file into the built-in memory
Select the file No.
Give a title to the selected file.
Space:
Ð
Alphabetical characters: A to Z
Ð
Numerals: 0 to 9
Ð
Symbols: ', >, <, /, -, . , x
AJ-HPX2700G-VQT1V27_eng.book 99 ページ ２００８年９月２日 火曜日 午後５時４３分