Filter
Top Products
175
Menu: Menu Description Tables
Menu
Note
The items indicated by are the setting items for PAINT
MENU SW() R/W in the <SD CARD R/W SELECT>
screen. The items without are the setting items for PAINT
MENU LEVEL R/W.
Please refer to [SD CARD R/W SELECT] (page 195) for
more information.
HIGH SETTING
Items/
Data Saved
Adjustable
Range
Remarks
MASTER GAIN –3dB
:
6dB
:
30dB
Select the master gain from –3, 0, 3, 6,
9, 12, 15, 18, 21, 24, 27, or 30 dB.
SCUF–
H.DTL LEVEL 00
:
05
:
63
For performing the horizontal detail
correction level setting.
SCUF–
V.DTL LEVEL 00
:
07
:
31
For performing the vertical detail
correction level setting.
SCUF–
DTL CORING 00
:
12
:
60
For performing the noise elimination
level setting for detail.
SCUF–
H.DTL FREQ. 00
:
18
:
31
For performing the horizontal detail
frequency selection.
SCUF–
LEVEL DEPEND. 0
:
3
:
5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized, details
of dark sections are compressed.
If the numerical value is larger, details of
bright sections are also compressed.
SCUF–
MASTER
GAMMA
0.30
:
0.45
:
0.75
For setting the master gamma. (0.01
step)
SCUF–
BLACK GAMMA –8
:
OFF
:
+8
For setting the gamma curve for the dark
portion.
–8 to –1:
The dark portion is compressed.
OFF: Standard state
+1 to +8:
The dark portion is extended.
SCUF–
B.GAMMA
RANGE
1
2
3
For setting the upper limit of
compression/expansion.
1: Approximately 20%
2: Approximately 30%
3: Approximately 40%
SCUFR
MATRIX
TABLE
OFF
A
B
For selecting the color correction table
for the linear matrix.
SCUF–
COLOR
CORRECT
ON
OFF
For switching on/off of the 12-axis
independent color correction.
SCUF–
ADDITIONAL DTL
Items/
Data Saved
Adjustable
Range
Remarks
KNEE APE LVL OFF
1
:
5
For changing the detail level of the high
brightness portion.
SCUFR
DTL GAIN(+) –31
:
+00
:
+31
Adjust the detail level toward +
(upwards).
SCUFR
DTL GAIN(–) –31
:
+00
:
+31
Adjust the detail level toward the –
(downwards).
SCUFR
DTL CLIP 00
:
54
:
63
For setting the level for clipping the detail
signals.
SCUFR
DTL SOURCE (R+G)/2
(G+B)/2
2G+R+B /4
(3G+R)/4
R
G
For setting the proportion of the RGB
signal components that provide the
detail.
SCUFR
V DTL FREQ 360TV
450TV
540TV
630TV
720TV
For selecting the vertical detail
frequency.
The frequency notation is the value
converted in 720P.
SCUFR
H.DTL LINE MIX 0H
1H
2H
For setting the number of scanning lines
to be added to the video signals in order
to generate the horizontal detail signals.
SCUFR
MASTER DTL –31
:
+00
:
+31
For revising the master detail level.
SCUFR
AJ-HPX2700G-VQT1V27_eng.book 175 ページ ２００８年９月２日 火曜日 午後５時４３分