Filter
Top Products
188
Menu: Menu Description Tables
WHITE BALANCE MODE
Items/
Data Saved
Adjustable
Range
Remarks
FILTER INH ON
OFF
For selecting independently whether
memory data for white balance (Ach,
Bch) is retained or not for the respective
CC filters.
ON: Regardless of the CC filter, data
for the memories (2 memories)
for Ach and Bch is retained.
OFF: The memory data (8 memories)
for Ach and Bch is retained for
the respective CC filters.
–CUFR
SHOCKLESS
AWB
OFF
FAST
NORMAL
SLOW1
SLOW2
SLOW3
For setting the length of time for
transiting to the switched position of
white balance, when the position of the
WHITE BAL switch is changed.
OFF: To transit instantly
FAST: About 1 second
NORMAL:
About 2 seconds
SLOW1:
About 3 seconds
SLOW2:
About 10 seconds
SLOW3:
About 20 seconds
–CUFR
AWB AREA 25%
50%
90%
For switching the detection area for
executing the automatic adjustment of
white balance.
25%: An area near the screen center
equivalent to 25% of the screen
is detected.
50%: An area near the screen center
equivalent to 50% of the screen
is detected.
90%: An area equivalent to 90% of the
screen is detected.
–CUFR
TEMP PRE SEL
SW
VAR
3.2K/5.6K
For changing the detection area on
which automatic white balance
adjustment is performed.
VAR:
From 2300K
to 9900K is
selectable.
3.2K/5.6K:
The detection area is fixed to
3200K or 5600K.
–––F–
COLOR TEMP
PRE
2300K
:
3200K
:
9900K
For setting the color temperature when
the WHITE BAL switch is set to the
[PRST] position.
Since the range of color temperatures
that can be set will vary with the CC
filter position, a numerical value
cannot be changed even if the color
temperature is changed when a high
color temperature is set.
–––F–
AWB A TEMP 2300K
:
3200K
:
9900K
For setting the color temperature when
the WHITE BAL switch is set to the [A]
position.
If the automatic adjustment of white
balance is executed in the [A] position,
the color temperature at that time is
memorized in the position of the WHITE
BAL switch [A].
–––F–
AWB B TEMP 2300K
:
3200K
:
9900K
For setting the color temperature when
the WHITE BAL switch is set to the [B]
position.
If the automatic adjustment of white
balance is executed in the [B] position,
the color temperature at that time is
memorized in the position of the WHITE
BAL switch [B].
–––F–
LENS/IRIS
Items/
Data Saved
Adjustable
Range
Remarks
A.IRIS LEVEL 000
:
045
:
100
Set the target value for auto iris.
–CUFR
A.IRIS PEAK/
AVE
000
:
030
:
100
Determine the peak-to-standard ratio for
the auto iris.
A larger value sets the auto iris to
respond to the peak in the iris detection
window, while a smaller value sets it to
respond to the average value in the
window.
–CUFR
A.IRIS WINDOW NORM1
NORM2
CENTR
Select the auto iris detection window.
NORM1:
The window closer to the center
of the screen.
NORM2:
The window closer to bottom of
the screen.
CENTR:
The spot window in the center of
the screen.
–CUFR
IRIS GAIN CAM
LENS
Select which unit controls IRIS GAIN.
Note
Lenses with an extender, such as 2,
0.8 sold before FUJINON DIGI
POWER, perform iris compensation
while enabling the extender. Therefore, if
this setting is switched to “CAM”, the
camera’s iris control will not operate
properly.
–CUFR
IRIS GAIN
VALUE
01
:
10
:
20
Set the adjustable value for IRIS GAIN.
This setting is effective when “CAM” is
selected for IRIS GAIN.
–CUFR
Items/
Data Saved
Adjustable
Range
Remarks
AJ-HPX2700G-VQT1V27_eng.book 188 ページ ２００８年９月２日 火曜日 午後５時４３分