Filter
Top Products
87
Adjustments and Settings for Recording
: Selection of video output signals
Adjustments and Settings for Recording
The unit employs the HD SDI A · B connector and the MON OUT connector as connectors for outputting video signals.
Change the characters of the signal output from the HD SDI
A · B connector using the <OUTPUT SEL> screen from the
menu. The character content output from the HD SDI A · B
connector and MON OUT is the same.
The signals output from the HD SDI A · B connector are
switched with the HD SDI A · B switch.
However, the switching operation is not acknowledged
during the recording operation.
MEM: During EE, such as recording, video images
taken by the camera are output. Meanwhile,
signals on the P2 card are output during
playback.
CAM: The camera images are output at all times.
OFF: No signal is output from the HD SDI A · B
connector.
a. HD SDI A · B switch
Selection of video output signals
Settings of signals output from HD SDI A · B connector
Item
Variable
range
Remarks
OUTPUT
ITEM
MENU
ONLY
TC
STATUS
Set the characters to be superimposed
on the output signals from the HD SDI A
· B connector and MON OUT connector.
MENU ONLY:
The menu screen is
superimposed only when the
menu is accessed. This normally
displays nothing.
TC: Time codes are superimposed.
(When the menu is accessed,
the menu screen is
superimposed.)
STATUS:
The characters that are the
same as the characters
superimposed in the viewfinder
screen are superimposed.
(When the menu is accessed,
the menu screen is
superimposed.)
HD SDI A ·
B CHAR
OFF
ON
ON: The characters are
superimposed on the HD SDI A ·
B connector.
OFF: The characters are not
superimposed on the HD SDI A ·
B connector.
a
HD SDI A B
TCG
CHARACTER
OUTPUT SEL
MEM
CAM
OFF
F-RUN
SET
R-RUN
ON
OFF
MEM
CAM
OFF
MON OUT
AJ-HPX2700G-VQT1V27_eng.book 87 ページ ２００８年９月２日 火曜日 午後５時４３分