Filter
Top Products
(4) Unless NO is selected by pressing the Down
(DOWN/BAR) switch within about 10 seconds after the
screen shown in Step (2) above appears, or unless
the Up (UP/ABC) switch or the Down (DOWN/BAR)
switch is pressed in 10 seconds or more after the
screen shown in Step (2) appears, the reset operation
is suspended as indicated by the screen at right, and
the operation returns to normal state.
-48-
NON RESET
CAMERA INSTALLATION
The camera can be mounted using the mounting hole on
top or the one in the bottom of the camera as shown
below.
The mounting hole has a standard 1/4-20" thread designed
for pan-head screws, such as those used on tripods.
Caution:
If this camera will be mounted on a tripod or mounting
bracket, Each must be capable of supporting four times
the total weight of the camera.