Filter
Top Products
Recording
- 132 -
Recording Mode:
Taking Pictures in Custom Set
You can register the current camera settings as custom settings. If you then record in
Custom Mode, you can use the registered settings.
•
Initial setting of the Program AE Mode is registered as the custom settings initially.
To allow recording using the same settings, up to 3 sets of current camera settings can be
registered using [Cust.Set Mem.].
1 Select [Cust.Set Mem.] in the [Custom] menu. (P60)
2 Touch the custom set to register.
•
Confirmation screen is displayed. It is executed when [Yes] is
selected.
Exit the menu after it is executed.
∫ Example of registering the settings of the Recording Mode ( ) and menus etc.
to [ ]:
1 Make settings 2 Register
Refer to the below “Registering Personal Menu Settings (Registering
custom settings)” section for details about steps 1, 2.
Even if you change the settings.
3 Set to Custom Mode 4 Settings registered in
Step 2 are called up
Refer to P133 for details about steps 3, 4.
Registering Personal Menu Settings (Registering custom settings)
Preparations: Set in advance the Recording Mode you wish to save and select the
desired menu settings on the camera.