Panasonic DMC-GF5 Digital Camera User Manual


 
Preparation
- 14 -
Align the lens fitting marks A (red marks) and then rotate the lens in the
direction of the arrow until it clicks.
Do not press the lens release button B when you attach a lens.
Do not try to attach the lens when holding it at an angle to the camera body as the lens mount
may get scratched.
Be sure to remove the lens cap when recording.
Note
Do not insert your fingers into the mount when the lens and body cap
are removed from the camera body.
To prevent dust or debris from adhering to internal parts of the
camera body, fit the body cap or a lens to the mount on the camera
body.
To prevent scratching of the contact points, fit the lens rear cap to the
lens when it is unattached or fit the lens to the camera body.
It is recommended to attach the lens cap or attach the MC Protector
(optional) to protect the lens surface when carrying. (P190)
Attaching the lens
Preparations: Remove the rear lens cap from the lens.
If the body cap is fitted to the camera, remove it.