Filter
Top Products
Recording
- 84 -
Applicable modes:
Taking Pictures using Burst Mode
Pictures are taken continuously while the shutter button is pressed.
Press 4 ().
Touch burst icon ([ ], etc.).
Select and touch the burst speed.
¢1 Number of recordable pictures
¢2 Depending on the recording conditions, the number of frames in a burst may be reduced.
(For example, when [i.Resolution] of the recording menu is set to [EXTENDED], the number
of frames in a burst may be reduced)
¢3 Pictures can be taken until the capacity of the card becomes full. However the burst speed
will become slower halfway. The exact timing of this depends on the aspect ratio, the picture
size, the setting for the quality and the type of card used.
• The Burst Mode speed may become slower depending on the following settings.
–[Picture Size] (P141)/[Quality] (P142)/[Sensitivity] (P143)/[Focus Mode] (P32)/[Focus Priority]
(P156)
• Burst speed can also be set with [Burst Rate] in the [Rec] menu.
• Refer to P142 for information about RAW files.
[H]
(High speed)
[M]
(Middle speed)
[L]
(Low speed)
Burst speed
(pictures/second)
432
Live View during Burst
Mode
None Available Available
¢1
With RAW files
Max. 5 pictures
¢2, 3
Without RAW files
Depends on the capacity of the card
¢3