Filter
Top Products
- 87 -
Recording
∫ Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
Bracket
1 Select [Auto Bracket] in the [Rec] menu. (P60)
2 Touch [Single/Burst Settings], [Step] or [Sequence].
3 Touch the setting.
•
You can take one picture at a time when set to [ ].
• You can continuously take pictures up to set numbers when set to [ ].
• Exit the menu after it is set.
Note
•
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
• The exposure may be compensated incorrectly, depending on the brightness of the subject.
• When taking pictures continuously using Auto Bracket with [i.Resolution] set to [EXTENDED], it
may take time to record all the set number of pictures.
• Auto Bracket is disabled in the following cases.
–[Glistening Water], [Glittering Illuminations] and [Soft Image of a Flower] in Scene Guide
Mode
–[Miniature Effect], [Soft Focus] and [Star Filter] in Creative Control Mode
–When White Balance Bracket is set.
–When recording motion pictures
–When recording using the flash
Item
Settings
Item
Settings
[Single/Burst
Settings]
[ ] (single)
[Sequence]
[0/`/_]
[] (burst) [`/0/_]
[Step]
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)