Filter
Top Products
48
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Card Features
You can record still images to a Memory
Card.
1
Slide the M-CARD Lock Switch to
unlock, then set POWER to M-CARD.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
M-CARD position.
•“PLAY: PUSH PLAY KEY” is
displayed for 10 seconds. (p. 50)
2
Press MENU to display CARD
SETTING menu, then press JOG KEY
to select NORMAL or FINE .
• Press MENU to exit this menu.
3
Press PHOTOSHOT to record an
image.
• The PhotoShot image is recorded to
the Memory Card.
• When SHUTTER is set to ON (Menu
OSD: p. 108), still pictures are
recorded with a visual shutter effect
and click sound. If set to OFF, the still
image will be displayed only.
1
POWER
2
JOG KEY
3
PHOTOSHOT
Image Resolution and Capacity
(supplied 8MB Memory Card)
REC
Mode
FINE
NORMAL
Image
Resolution
1280 x 960
640 x 480
Capacity
Approx. 30 images
Approx. 70 images
• The number of images given for each
mode applies when all images are taken in
same mode.
• You can change recording modes at any
time before capturing an image.
• The number of images that can be
captured may differ depending on the
subject. After capturing an image, the
number may not decrease, or it may
decrease by two. This is normal.
• While “PROCESSING” is displayed, DO
NOT turn off the Palmcorder or unplug
the AC Adaptor (supplied) because this
will cause irreversible damage to the
memory.
Before you begin
• Connect the Palmcorder to a power
source. (pp. 14, 15)
• Set POWER to OFF before inserting a
Memory Card. (p. 13)
Card PhotoShot
• Memory Card will not work when DV
interface Cable (i.LINK) is connected.
Warning
Warning
M-CARD
Lock
2
MENU
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
52