Filter
Top Products
English
VQT0K98
147
Message Cause & Troubleshooting
Reference
page
CARD ALMOST FULL Remaining space is only enough to record less than 10 stills.
Delete unnecessary stills and try the card, or use another card.
31, 96
Card error has occurred.
Format the card now?
Was the card formatted on PC? Was formatting interrupted
midway? When using the card on this DVD Video Camera, choose
“YES” and format it.
121
Card error has occurred.
Formatting is not
complete.
The card may be damaged: Use another card.
29
Card error. • The card terminals may be dirty: Wipe off dirt, and try the card
again, or use another card.
• Data other than still image may be included: Use another card.
29
Card error has occurred.
Keep card inside &
restart.
Card error could have occurred during editing of scenes. Turn off the
DVD Video Camera with the card being used inside, connect the AC
adaptor/charger, and then power the DVD Video Camera again.
Repair of scenes will be attempted.
43, 48
Card full. Delete unnecessary stills and try the card, or use another card.
31, 96
No more recording on this card can be done: Delete unnecessary
stills or use another card.
Card full.
Cannot execute.
Delete unnecessary stills and try the card, or use another card.
31, 96
Card has no data. This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
Card is not formatted.
Format the card now?
Was the card formatted on PC? When using the card on this DVD
Video Camera, choose “YES” and format it.
121
Control Information
Error.
Mismatch may occur between the recorded image and scene
information.
Update the control information.
122
• Use another disc.
• See *3 on page 152.
26, 70
315
ENG.book Page 147 Tuesday, March 23, 2004 8:12 PM