Filter
Top Products
English
VQT0K98
38
Setting Date and Time
Set the current date and time so that the date and time you make a recording can be recorded correctly.
The following procedure can also be used to correct the date and time you have already set.
1 Turn the DVD Video Camera on.
2 Press the MENU button.
The menu screen will
appear.
3 Use the joystick to choose
“Date Setup” and then
“Date Set”.
4 Tilt the joystick to right.
The figure for the day will
be selected.
[The digit that is
highlighted first depends
on the date display format
(set up in Date Mode): The digit on the left end of
the date display will be first highlighted.]
Note:
After setting the figure for the day, tilt the joystick to right
to select the digit to be set. If you press the
A button
after selecting the figure for the day, the screen for
verifying the set date will appear instead of screen for
setting month, year or time.
5 Tilt the joystick to left or
right to select the digit you
want to set in sequence.
Tilt the joystick up or down
to select the number for
current date/time, and
then repeat step 5 to set the current date and
time.
Note:
To stop date/time setting midway, press the C button.
6 After setting the current
date and time, press the
A button.
The screen for verifying
the set date will appear.
7 If the displayed date and time are correct, use the
joystick to choose “YES”, and then press the
A button.
The date and time will be set, and the DVD Video
Camera will enter the recording pause status.
Choosing “NO” will restore the menu screen.
Note:
This DVD Video Camera incorporates a rechargeable
battery to store the date and time in memory. If this built-
in battery is exhausted, the date and time will be reset. To
prevent this, connect the AC adaptor/charger to DVD Video
Camera every 3 months, and leave them for at least
24 hours with the DVD Video Camera turned off: The built-
in battery will be charged.
Tilt up/down and to left/right
to select, and then press
A to designate.
Ca
m
era Functions Setup
Progra
m
AE : Auto
Ca
m
era Functions Setup
Progra
m
AE : Auto
W
hite Bal. : Auto
Dig.Z
oom
:
O
ff
Wind Cut
:
O
ff
Cinema
:
O
ff
SIS :
O
ff
ENTER RETURN
RAM
W
hite Bal. : Auto
Wind Cut
:
O
ff
Cinema
ENTER RETURN
RAM
RAM
Date Mode
ENTER RETURN
Date Setup
20:11
Date Set 10.
3.2004
RAM
Date Mode
ENTER RETURN
Da te Se t up
Date Set 10.
3.2004
20:11
RAM
Date Mode
ENTER RETURN
Da te Se t up
Date Set 21.
3.2004
20:11
ENTER
RAM
21.
3.2004
20:11
Date set up?
YES NO
Da te Se t
206
ENG.book Page 38 Tuesday, March 23, 2004 8:12 PM