Filter
Top Products
English
VQT0K98
150
Message Cause & Troubleshooting
Reference
page
Finalise may not be
complete. Finalise again
now?
Instantaneous shutoff occurred during finalising, after which power
was supplied and disc was inserted. 123
It is unrecordable on this
card.
The inserted card cannot be used in this DVD Video Camera: Use
another card.
29
JPEG file related to
scenes are not found.
This message will appear when stills recorded on DVD-RAM disc
using a device other than this DVD Video Camera are to be copied
to card.
No card. Insert a card. 47
No card.
Please insert card.
No card is inserted.
Insert a card.
47
NO DISC This message may appear when the DVD Video Camera or disc is
moved from a cold place to a warm place.
Condensation has occurred on the video camera lens or DVD-RAM
drive. Do not remove the disc; leave the DVD Video Camera turned
off in a place as dry as possible for 1-2 hours.
6
The disc has not been inserted.
Insert it.
44
No more scenes. Play
List was deleted.
• All scenes are deleted from the play list.
• Since a play list with no scenes cannot be supported by
specifications, a play list from which all registered scenes have
been deselected will be deleted.
115, 116
Photo cannot be
divided.
Still image cannot be divided.
102
PlayLists over limit. An attempt was made to create new play list or copy play list, even
though limit specified for play lists in the video recording standard
had already been stored.
111
Same scenes on Play
List will be deleted.
Delete scenes?
• This will appear when scenes are to be deleted.
• When a play list exists on disc, an attempt to delete scenes in
program will display this message (This message will not appear
if you deselect scenes from play list.).
96
Scenes over limit.
Cannot add scenes.
The number of scenes entered in play list has reached the limit that
can be entered.
Delete several scenes.
111, 116
Scenes over limit.
Cannot divide scene.
The number of entered scenes has reached the limit that can be
entered.
Delete several scenes.
102, 111
Scenes over limit.
Cannot move scene.
This message will appear if you try to move a scene when the
number of scenes has already reached the registrable limit.
99, 111
318
ENG.book Page 150 Tuesday, March 23, 2004 8:12 PM