Filter
Top Products
25
[OSD position]
• OSD position
Select the position where the time and date and a char-
acter string to be displayed on the image of the "Live"
page.
Upper left: The above information will be displayed at
the upper left corner of the main area on the "Live"
page.
Lower left: The above information will be displayed at
the lower left corner of the main area on the "Live"
page.
Upper right: The above information will be displayed at
the upper right corner of the main area on the "Live"
page.
Lower right: The above information will be displayed at
the lower right corner of the main area on the "Live"
page.
Default: Upper left
• Character size
Select the character size of the entered character string
to be displayed at the selected OSD position on the
image of the "Live" page.
Large: The character size will become large size.
Middle: The character size will become standard size.
Small: The character size will become small size.
Default: Middle
[Brightness status display]
Select "On" or "Off" to determine whether or not to dis-
play the status of brightness on images displayed on the
"Live" page when adjusting brightness.
Default: On
[Upside-down]
Select "On" or "Off" to determine whether or not to dis-
play vertical-flip images.
Default: Off
[Link/Access LED]
Determine whether or not to use the following LEDs.
Select "On" to use the following LEDs to check the oper-
ational status by lighting them.
Select "Off" to turn off the LEDs at all times.
• Power LED
• Link LED
• Access LED
• SD memory card error LED/ABF LED
Default: On
Note:
• Power LED [Green]: This LED will light when the
power is on.
• Link LED [Orange]: This LED will light when com-
munication with the connected device is available.
• Access LED [Green]: This LED will light when
accessing a network.
• SD memory card error LED/ABF LED [Red]:
Lights when an error occurred in the SD memory
card. This LED will blink in the process of the auto
back focus function and blinking will stop when the
focus adjustment is complete.
[Alarm status update mode]
Select an interval of the camera status notification from
the following.
When the status of the camera changes, the alarm
occurrence indication button, the [AUX] button or the SD
saving status indicator will be displayed to notify of the
camera status.
Polling(30sec): Updates the status each 30 seconds
and provide notification of the camera status.
Real time: Provide notification of the camera status
when the status has changed.
Default: Real time
Note:
• Depending on the network environment, notification
may not be provided in real time.
[Alarm status reception port]
When selecting "Real time" for "Alarm status update
mode", designate a port number to which the status
change notification is to be sent.
Available port number: 1 - 65 535
Default: 31 004
[Automatic installation of viewer software]
Determine whether or not to install the viewer software
from this camera.
On: Installs the viewer software from the camera auto-
matically.
Off: The viewer software cannot be installed from the
camera.
Default: On