Filter
Top Products
27
[Save trigger]
Select a trigger to save images on the SD memory card
from the following.
FTP error: Saves images when images have failed to
transmit to the FTP server by the FTP periodic
image transmission function.
Alarm input: Saves images at an alarm occurrence.
Manual: Saves images manually.
Default: FTP error
Note:
• Select "FTP error" when images are to be transmit-
ted to the FTP server at an alarm occurrence.
[Overwrite]
Determine whether or not to overwrite when the SD
memory card becomes full.
This setting is available only when "Manual" is selected
for "Save trigger".
On: Overwrites when the SD memory card becomes
full. (The oldest image is the first to be overwritten.)
Off: Stops saving images on the SD memory card when
the SD memory card becomes full.
Default: Off
Note:
• The overwrite setting will be as follows according to
the "Save trigger" setting.
FTP error: Will not be overwritten.
Alarm input: Will be overwritten.
Manual: Can be determined by selecting "On" or
"Off" for "Overwrite".
[File name]
Enter the file name used for the image to be saved on
the SD memory card. The file name will be as follows.
File name: ["Entered file name" + "Time and date
(year/month/day/hour/minute/second)"] + "Serial
number"
Available number of characters: 1 - 8 characters
Note:
• When "FTP error" is selected for "Save trigger", the
file name entered for "File name" on the [FTP img.
trans.] tab of the "Network" page will be used for the
file name of the image saved on the SD memory
card.
[Image saving interval/Number of images to be
saved]
• Image saving interval
When "Alarm input" or "Manual" is selected for "Save
trigger", select an interval (frame rate) of saving images
on the SD memory card from the following.
0.1fps/0.2fps/0.33fps/0.5fps/1fps
Default: 1fps
• Number of images to be saved
Select a number of alarm images to be saved on the SD
memory card from the following.
10pics/20pics/30pics/50pics/100pics/200pics/300pics/
500pics/1000pics/2000pics/3000pics
Default: 100pics
Note:
• "Number of images to be saved" can be configured
only when "Alarm input" is selected for "Save trig-
ger".
[Image capture size]
When "Manual" is selected for "Save trigger", determine
the resolution of image to be saved on the SD memory
card from "QVGA", "VGA" or "1280x960".
Default: VGA
Note:
• When "FTP error" is selected for "Save trigger",
images will be saved with the image capture size
selected on the [FTP img. trans.] tab of the
"Network" page.
• When "Alarm input" is selected for "Save trigger",
images will be saved with the image capture size
selected on the [Alarm] tab of the "Alarm" page.
• "QVGA" is available only when "1.3 mega pixel" is
selected for "Image capture mode".