Panasonic WV-NP502/WV-NW502S Security Camera User Manual


 
36
Configure the settings relating to images and
audio [Image/Audio]
The settings relating to JPEG, H.264 and MPEG-4 images such as the settings of image quality, audio, etc. can be
configured on this page.
The "Image/Audio" page has 3 tabs; the [JPEG/H.264] tab (or [JPEG/MPEG-4] tab), the [Image/Privacy] tab and the
[Audio] tab.
Configure the settings relating to JPEG images [JPEG/H.264]
(or [JPEG/MPEG-4])
Click the [JPEG/H.264] tab (or [JPEG/MPEG-4] tub) on the "Image/Audio" page. ( pages 20 and 21: How to dis-
play/operate the setup menu)
[Image capture mode]
Select "3 mega pixel" or "1.3 mega pixel" for "Image
capture mode".
Default: 1.3 mega pixel
Important:
When this setting is changed, the camera will reboot
automatically.
Check the following before changing "Image capture
mode" from "1.3 mega pixel" to "3 mega pixel".
"QVGA" is not selected for "Image capture size"
of "JPEG".
"QVGA" is not selected for "Image capture size"
of "SD memory card". ( page 27)
"QVGA" is not selected for "Image capture size"
of "Alarm image". ( page 55)
"QVGA" is not selected for "Image capture size"
of "FTP periodic image transmission".
( page 77)
"On" is not selected for "Activation" of "Priority
stream", and "JPEG" is not selected for "Stream
type". ( page 68)
Check the following before changing "Image capture
mode" from "3 mega pixel" to "1.3 mega pixel".
"2048x1536" is not selected for "Image capture
size" of "JPEG".
JPEG
Configure the settings such as "Refresh interval
(JPEG)*", "Image capture size" and "Image quality" on
this section. Refer to page 37 and 40 for further informa-
tion about the settings relating to H.264 (or MPEG-4)
images.
[Refresh interval (JPEG) *]
Select an interval to refresh the displayed JPEG image
from the following.
0.1fps/0.2fps/0.33fps/0.5fps/1fps/2fps/3fps/5fps/6fps/
10fps/15fps */30fps *
Default: 10fps
Note:
When "On" is selected for "H.264 transmission" (or
"MPEG-4 transmission"), the refresh interval may be
longer than the set value when any value with an
asterisk (*) on the right is selected.
[Image capture size]
Select "QVGA", "VGA", "1280x960" or "2048x1536" for
the image capture size of JPEG images.
Default: 1280x960
Note:
"2048x1536" is available only when "3 mega pixel" is
selected for "Image capture mode".
"QVGA" is available only when "1.3 mega pixel" is
selected for "Image capture mode".
[Image quality]
Select image quality of JPEG images from the following.
0 Super fine/1 Fine/2/3/4/5 Normal/6/7/8/9 Low
Default: 5 Normal