Filter
Top Products
80
Configure the settings relating to the schedules [Schedule]
On the "Schedule" page, it is possible to configure the settings relating to schedules as follows.
• Alarm permission (Alarm input will be received only in the specified schedule.)
• VMD permission (Video motion detection will be active only in the specified schedule.)
• Access permission (Access to the camera will be allowed only in the specified schedule.)
(☞ pages 20 and 21: How to display/operate the setup menu)
Up to 5 schedules can be set.
Step1
Select an action to be assigned to the schedule from
"Schedule mode". "Off" is selected at the default.
Off: No action will be taken for the respective schedule.
Alarm permission: Alarm input (terminal alarm 1, 2 and
3) will be received during the period of the schedule.
VMD permission: The Video motion detection (VMD)
function will be active during the period of the sched-
ule.
Access permission: Users whose access level is set
to 2 and 3 on the [User auth.] tab of "User mng."
page (☞ page 66) can access the camera only in
the period of schedule.
Note:
• Select "On" for "User auth." on the [User auth.] tab
of "User mng." page (☞ page 66) and "Off" for "Host
auth." on the "Host auth." page (☞ page 67) to vali-
date "Access permission".
Step 2
Select days of a week by checking the respective
checkboxes.
Step 3
Click [C] to select the start time and the end time of the
schedule.
When not designating time, check the checkbox of
"24h".
Step 4
Click the [Set] button after completing the settings.
→ The result will be displayed at the bottom of the win-
dow.
Note:
• The schedules displayed at the bottom of the win-
dow can be identified by colors assigned to each
schedule.