Filter
Top Products
38
Off: H.264 images and audio will be transmitted using
the UDP port.
Default: Off
Note:
• When "On" is selected, only "Unicast port (AUTO)"
will be available for "Transmission type".
• When "On" is selected, it may take time to start dis-
playing H.264 images.
• When "On" is selected, H.264 images may not be
displayed depending on the number of the concur-
rent access user and audio data availability, etc.
• When "On" is selected, only IPv4 access is avail-
able.
• When "On" is selected for either "H.264(1)" or
"H.264(2)", only "Off" and "Mic input" are available
for "Audio transmission/reception".
• When "On" is selected for either "H.264(1)" or
"H.264(2)", the maximum concurrent access number
is equal to or less than 10 users.
[Image capture size]
Select "QVGA", "VGA" or "1 280 x 960" for the image
capture size of H.264 images.
Default: H.264(1): 1280x960
H.264(2): VGA
[Transmission priority]
Select "Constant bit rate" or "Frame rate" for the H.264
transmission mode.
Constant bit rate: H.264 images will be transmitted
with the bit rate selected for "Max bit rate (per
client) *".
Frame rate: H.264 images will be transmitted with the
frame rate selected for "Frame rate".
Default: Constant bit rate
Note:
• When "Frame rate" is set for "Transmission priority",
number of users who can access the camera may
be limited more (may become less than 10).
[Frame rate]
Select a frame rate for H.264 images from the following.
1fps/3fps/5fps */7.5fps */10fps */15fps */20fps */30fps *
Default: 30fps *
Note:
• When "Frame rate" is selected for "Transmission pri-
ority", this setting is available.
• "Frame rate" is synchronized with "Max bit rate (per
client)*". For this reason, the frame rate may be
lower than the specified value when any value
marked with an asterisk (*) is selected.
[Max bit rate (per client) *]
Select a H.264 bit rate per a client from the following.
64kbps/128kbps */256kbps */384kbps */512kbps */
768kbps */1024kbps */1536kbps */2048kbps */
3072kbps */4096kbps */8192kbps */Unlimited *
Default: H.264(1): 4096kbps *
H.264(2): 1536kbps *
* "8192kbps" is available only when the image capture
size is "1280x960".
* "64kbps" and "128kbps" are available only when the
image capture size is "QVGA" or "VGA".
* "Unlimited *" is available only when "Frame rate" is
selected for "Transmission priority".
Note:
• The H.264 bit rate is synchronized with "Bandwidth
control(bit rate)" on the [Network] tab of "Network"
page (☞ page 73). For this reason, the bit rate may
be lower than the value when any value with an
asterisk (*) on the right is selected.
• When "8192 kbps *" or "Unlimited *" is selected, the
number of users who can access H.264 images will
be limited to "1". (Only a single user can access
H.264 images.)
• It is impossible to select "Unlimited *" for both
"H.264(1)" and "H.264(2)".
[Image quality]
Select the image quality of H.264 images from the fol-
lowing.
Fine/Normal/Low
Default: Normal
Note:
• When "Constant bit rate" is selected for
"Transmission priority", this setting is available.