Filter
Top Products
37
Configure the settings relating to H.264 images [JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image/Audio" page. (☞ pages 20 and 21: How to display/operate the setup
menu)
[JPEG/H.264] tab will be displayed when "H.264" is selected for "Video encoding format".
Configure the settings relating to H.264 image such as "Max bit rate (per client)", "Image capture size", "Image quali-
ty", etc. in this section.
Refer to page 40 and 36 for the settings relating to MPEG-4 images and JPEG images respectively.
[Video encoding format]
Select "H.264" or "MPEG-4" for the video encoding for-
mat.
H.264: H.264 will be set for the video encoding format.
The subsequent setting items will be for H.264. The
tab name will be changed to [JPEG/H.264].
MPEG-4: MPEG-4 will be set for the video encoding for-
mat. The subsequent setting items will be for MPEG-
4. (☞ page 40) The tab name will be changed to
[JPEG/MPEG-4].
Default: H.264
■ H.264(1) · H.264(2)
[H.264 transmission]
Select "On" or "Off" to determine whether or not to
transmit H.264 images.
On: Transmits H.264 images.
Off: Does not transmit H.264 images.
Default: On
Note:
• When "On" is selected for "H.264 transmission" in
“H.264(1)”, displaying of both H.264 images and
JPEG images on the “Live” page will become avail-
able.
• When "On" is selected for "H.264 transmission" in
"H.264(1)" and "H.264(2)", H.264 images are view-
able using other devices with each setting.
• When “On” is selected for “H.264 transmission” in
“H.264(1)” or “H.264(2)”, the transmission interval of
JPEG images may sometimes become longer.
[Internet mode (over HTTP)]
Select "On" when transmitting H.264 images via the
Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for
JPEG image transmission.
On: H.264 images and audio will be transmitted using
the HTTP port. Refer to page 73 for further informa-
tion about the HTTP port number settings.