Filter
Top Products
49
[Auto back focus]
The auto back focus function starts to automatically
adjust back focus based on a subject located in the cen-
ter of the screen by clicking the [Execute] button.
[Focus]
The back focus can be adjusted manually.
[Near] button: Click this button to adjust the focus to
the "Near" side.
[Reset] button: Click this button to reset the focus to
the default.
[Far] button: Click this button to adjust the focus to the
"Far" side.
[Adjusting method]
Select the back focus adjustment method upon switch-
ing between the color mode and the black & white
mode.
Auto: Adjusts the back focus function automatically and
corrects out of focus when switching between color
and black & white images.
Preset: Performs the preset movement to each speci-
fied back focus position when switching between
color and black & white images. The preset position
is the back focus position specified last time, which
was automatically memorized for each of color
images and black & white images.
Fix: Fixes the position after adjusting the back focus
either automatically or manually.
Default: Auto
[Close] button
Click this button to close the back focus setup menu.
Back focus setting (Back focus setup menu)
Click the [Setup >>] button of "Back focus" on the [Image/Privacy] tab of the "Image/Audio" page. (☞ page 43)
Adjust the back focus by moving the CCD of the camera to the appropriate position.
Manual and auto adjustment are available.
The auto back focus function also allows users to correct out of focus when changing between color and black &
white images.