Filter
Top Products
Configuring the RAS with a Web browser 43
Model 3120 RAS Getting Started Guide 3 • Configuring the RAS for operation
Figure 31. WAN Circuit Configuration window, signaling Settings section
Setting the line signaling for an E1/PRI (ISDN) line
Do the following:
1. Scroll down the
WAN Circuit Configuration window, until the Signaling Settings section appears (see
figure 31).
2. Click on the
Signal Mode pop-up menu and choose messageOriented(4).
3. Click on the
Message Oriented Switch Type pop-up menu (see figure 31) and choose CTR4(3).
4. Click on
Submit Query.
Signaling is now configured for E1/PRI.
Setting the line signaling for an E1/R2 line
Do the following:
1. Scroll down the
WAN Circuit Configuration window, until the Signaling Settings section appears (see
figure 31).
2. Click on the
Signal Mode pop-up menu and choose bitOriented(3).
3. Click on
Submit Query.
4. Select
MFR Version 2 on the Configuration Menu, then click on Modify. The MFR Version 2 Modify win-
dow appears (see figure 32).