Filter
Top Products
3 • Configuring the RAS for operation Model 3120 RAS Getting Started Guide
44 Configuring the RAS with a Web browser
Figure 32. MFR Version 2 Modify window
5. Click on the Country pop-up menu. If your country is not available, select ituStandard(1).
6. Click on
Submit.
7. Scroll down to the
Interregister signaling section.
8. Type the Called Number Total Digits in the box provided. This setting tells the RAS how many digits to
expect from the phone company. The called Number is the number a user dials to call into the RAS.
9. Set the First/Middle and Last Response Codes. These are the codes the switch expects after each digit sent
by the switch.
10. Click on
Submit.
11. Type the Calling Number Total Digits in the box provided. This setting tells the RAS how many digits to
expect from the phone company. This number is the calling party’s phone number or Caller-ID informa-
tion.
12. Set the First/Middle and Last Response Codes. These are the codes the switch expects after each digit sent
by the switch.
13. Set Speech Condition Set-Up. Most installations will use b1(1).