3 • Configuring the RAS for operation Model 3120 RAS Getting Started Guide
48 Saving your configuration
Channel assignment
This section describes configuring the RAS so it will know which channels are active. Do the following:
1. Select
T1/E1 Link on the Configuration Menu. The T1/E1 Link Activity window appears (see figure 28 on
page 41).
2. Click on
Channel Assignment. The WAN Circuit Channel Assignment window appears (see figure 33 on
page 45).
3. Click on the
Dialin button under the Set all channels to: section. Channels 25 through 30 are ignored for
T1/PRI lines.
4. Click on
Submit Query.
Saving your configuration
The basic configuration for the RAS is now finished. Do the following to save your configuration settings:
1. Select
Home on the Configuration Menu. The Home window appears (see figure 18 on page 33).
2. Click on the
Record Current Configuration button (see figure 20 on page 35).
Note Failing to click on the Record Current Configuration button before
you power down or reset the RAS will cause your changes to be lost.
3. The Import/Export function enables you to make a backup (or export) copy of your access server’s configu-
ration parameters. By exporting the configurations, the saved files can quickly be loaded (or imported) into
a replacement access server—greatly speeding up the installation process should an access server need
replacing.
Note All actions for Import/Export require superuser access privileges.