Filter
Top Products
33
Image Tone You can change this setting.
When the u is connected, select from [Bright], [Natural],
[Portrait], [Landscape], [Vibrant] and [Monochrome]. If
[Monochrome] is selected, [Toning] and [Filter Effect] are
enabled in place of [Saturation] and [Hue].
When the q is connected, select [Bright] or [Natural].
Saturation You can change this setting (except when [Image Tone] is set
to [Monochrome]).
The available number of levels differs depending on the
connected camera.
Hue When the u is connected, you can change this setting
(except when [Image Tone] is set to [Monochrome]).
Contrast You can change this setting.
The available number of levels differs depending on the
connected camera.
Fine Sharpness When the u is connected, click the (Sharpness) icon
to switch to (Fine Sharpness).
Sharpness You can change this setting.
The available number of levels differs depending on the
connected camera.
Toning You can change this setting when the u is connected
and [Image Tone] is set to [Monochrome].
Filter Effect You can change this setting when the u is connected
and [Image Tone] is set to [Monochrome].
Image Save
Mode
You can change the file format, the number of recorded pixels,
and the JPEG quality.
Shake
Reduction
You cannot change this setting using the PENTAX REMOTE
Assistant 3.
Autofocus
Mode
You cannot change this setting using the PENTAX REMOTE
Assistant 3.
AF Point
(focusing area)
You cannot change this setting using the PENTAX REMOTE
Assistant 3.
Lens focal
length
You cannot change this setting using the PENTAX REMOTE
Assistant 3.
• Depending on the models or conditions of the cameras to which the settings
are to be copied, some shooting conditions may not be able to be copied
when [Synchronize] is clicked.
• For more information, see the Operating Manual of the camera.