Filter
Top Products
35
Sets the time (timer) until shooting starts after [Start] is clicked.
You can set this from 0 seconds to 12 hours, 0 minutes, and 0 seconds.
Sets the time interval between shots when [Number of shots] is set to [2]
or more (Interval shooting).
You can set this from 0 seconds to 24 hours, 0 minutes, and 0 seconds.
Sets the number of pictures to be taken. When this is set to [1], the
[Interval] setting is disabled and timer shooting can only be performed.
You can set this from [1] to [99].
Add a check next to [Release all shutters] to have all connected cameras
shoot at the same time.
Time Delay
Interval
If the interval time is set to a very short time or is set shorter than the exposure
time, the actual shooting interval may be longer than the set interval time.
Number of Shots
Release All Shutters
• [Synchronous shooting] is disabled in [Interval/Timer shooting]. When
multiple cameras are connected to the computer, only the active camera
takes a picture even if [Synchronous shooting] is selected for the desired
camera unless a check is next to [Release all shutters].
• When multiple cameras are connected to the computer, [Release all shutters]
cannot be applied to only some of the cameras.