Filter
Top Products
39
Sets whether to align the composite image when [Add] or [Average] is
selected.
When [Yes] is selected, you can adjust the angle and vertical and
horizontal position of each shot image after the first image using the
[Adjust composite] dialog box that is displayed after the number of pictures
set in [Number of shots] is taken.
Click two points on the preview image to adjust the position. Display the
two points on the first image, select another image from the drop-down list
on the bottom left of the [Adjust composite] dialog box, use the same
procedures and select the two points. The location is automatically
adjusted so that the points overlap.
Alternatively, adjust the angle and the horizontal and vertical positions with
the buttons on the right of the dialog box.
After adjusting the images, click [OK] to save the composite image as a
single image.
(The preview image is displayed.)
When [Add] or [Average] is selected, the [Exposure time increment for second
and subsequent frames] setting is disabled and the exposure time is fixed to
the [Exposure time for first frame] setting.
Alignment