Filter
Top Products
132
Changing Camera Settings
5
During operation, the camera generates four types of sounds: start
sound, shutter release sound, focus sound, and beep sound.
To change the operation sound settings, follow the steps below.
1
Display the SETUP menu.
• For the operating procedure, see P.123.
2
Press the " button to select [OPERATION SOUNDS]
and press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button.
Changing the Operation Sound
Setting (OPERATION SOUNDS)
Start sound : Sound when the camera is turned on.
Shutter release sound : Sound when the shutter release button is pressed.
Focus sound : Sound when the shutter release button is half-pressed and the
camera focuses on the subject.
Beep sound : Error sound indicating an operation that cannot be performed.
Available Settings
ALL (All sounds on) *Default setting
SHUTTER (Shutter release sound and beep sound only)