Ricoh G600 Digital Camera User Manual


 
If you are using the camera for the first time, read this section.
29
To turn the power on:
1
Press the power button.
After the start sound, the auto focus/
flash lamp blinks for several
seconds.
Using the Camera in playback mode
•Pressing the 6 (Playback) button
for more than one second turns on
the camera in playback mode,
allowing you to start playback at
once.
To turn the power off:
1
Press the power button.
Caution-----------------------------------------------------------------------------------------------
When the camera is turned on with the 6 button, pressing the 6 button again
switches playback mode to recording mode.
After the camera is turned on, it takes longer for the camera to become ready for
shooting when using the flash than when not using the flash.
Auto Power Off ------------------------------------------------------------------------------------
If the camera goes unused for a set period of time, it will automatically turn itself off
to save power. (Auto Power Off)
The Auto Power Off setting can be changed. (GP.131)
Turning the Power On/Off