Filter
Top Products
169
7
Appendices
The image lacks natural
color.
The picture was shot in conditions
that made it difficult for auto white
balance to adjust the white
balance.
Add a white object to the
composition or use a white
balance setting other than auto.
P.87
The date or recording
information does not
appear on the screen.
The screen display function is set
to no display.
Press the DISP. button to change
the display.
P.57
The brightness of the
picture display changes
during AF.
You are using AF in a dark place or
when the auto focus range and
surrounding brightness are
different.
This is normal. -
There is a vertical smear
on the image.
This is a phenomenon that occurs
when a bright subject is shot. It is
called the smear phenomenon.
This is normal. -
Playback/Deleting
Problem Cause Solution Refer to
Cannot play back, or the
playback screen does
not appear.
The camera is not in playback
mode.
Press the 6 (Playback) button. P.49
The contents of the SD
memory card cannot be
played back, or the
playback screen does
not appear.
No SD memory card is loaded, or
an SD memory card with no stored
images is loaded.
Load a card with stored images. P.27
You played back an SD memory
card that was not formatted with
this device.
Load a card that was formatted
and recorded with this device.
P.125
You played back an SD memory
card that was not recorded
normally.
Load a normally recorded card. -
The contact surface of the SD
memory card is dirty.
Wipe with a soft, dry cloth. -
There is something wrong with the
SD memory card.
Play back images from another
card and if there is nothing wrong
with the card, the camera is okay.
There may be something wrong
with the card, so do not use it.
-
The picture display
turned off.
Battery is running low. When using the dedicated
rechargeable battery or AAA
nickel-hydrogen batteries, charge
the batteries as required. When
using AAA alkaline batteries or
AAA oxyride batteries, replace
them with new batteries.
P.26
P.27
The camera was left unattended
and unused, so auto power off
turned it off.
Turn the camera back on. P.29
Problem Cause Solution Refer to