Filter
Top Products
140
Changing Camera Settings
5
When you shoot a still image, it is stored on an SD memory card or
in the internal memory with a consecutively numbered file name
that is automatically assigned.
When you switch SD memory cards, you can set your camera to
continue consecutive numbering from the previously loaded card.
To change the file name setting, follow the steps below.
1
Display the SETUP menu.
• For the operating procedure, see P.123.
2
Press the " button to select [SEQUENTIAL NO.] and
press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button.
Changing File Name Settings
(SEQUENTIAL NO.)
Available Settings
ON (Continue numbering) File names are automatically assigned to still images you take,
in the format of “R” followed by seven digits, from
R0010001.jpg to R9999999.jpg.
With this setting, file numbering is continued even when the SD
memory card is exchanged.
OFF (Do not continue
numbering) *Default setting
File numbering is assigned, from RIMG0001.jpg to
RIMG9999.jpg, for each SD memory card.
When the file name reaches RIMG9999, no more data can be
recorded to that card.